The Lekkie Pacemaker Full‑Twist Throttle is a premium full‑grip throttle built for e-bikes and light electric builds that use a standard 3‑wire throttle signal. It’s CNC‑machined from 6061‑T6 aluminum, anodized black, and made for smooth, consistent throttle control—clean feel and solid build quality.
Throttle response is progressive and predictable, so it’s easier to modulate power at low speed and stay smooth when you roll on. The electronics are sealed for all‑weather riding, and the built‑in blue “active” LED lets you know the throttle system is live.
It includes a matching left lock‑on grip, and the grips are replaceable if you want to swap compounds later. Both sides clamp down tight so they won’t slip when it’s wet, and the reinforced grip ends are designed to handle drops and impacts.
This throttle is for standard 3‑wire throttle systems (5V + Signal + Ground, typically 1–4.2V signal range).
Throttle comes with a 3‑pin connector.
If your bike/controller doesn’t have the matching connector, select the extension option with 3 loose wires so you can wire it to your setup.
Note: Connector styles and pin order can vary—verify your controller pinout before wiring.
Material: 6061‑T6 Aluminum (CNC)
Finish: Anodized Black
Handlebar fitment: 22.2mm OD
Cable length: 200mm standard (extensions available)
Weight: 152g (pair)
CNC 6061‑T6 aluminum body
Full‑twist throttle feel with smooth modulation
Blue LED “active” indicator
Lock‑on grips (includes matching left grip)
Replaceable grip sets
Weather‑sealed electronics
Fits standard 22.2mm handlebars
For standard 3‑wire throttle inputs (5V / Signal / Ground)
The Lekkie Pacemaker Full‑Twist Throttle is a premium full‑grip throttle built for e-bikes and light electric builds that use a standard 3‑wire throttle signal. It’s CNC‑machined from 6061‑T6 aluminum, anodized black, and made for smooth, consistent throttle control—clean feel and solid build quality.
Throttle response is progressive and predictable, so it’s easier to modulate power at low speed and stay smooth when you roll on. The electronics are sealed for all‑weather riding, and the built‑in blue “active” LED lets you know the throttle system is live.
It includes a matching left lock‑on grip, and the grips are replaceable if you want to swap compounds later. Both sides clamp down tight so they won’t slip when it’s wet, and the reinforced grip ends are designed to handle drops and impacts.
This throttle is for standard 3‑wire throttle systems (5V + Signal + Ground, typically 1–4.2V signal range).
Throttle comes with a 3‑pin connector.
If your bike/controller doesn’t have the matching connector, select the extension option with 3 loose wires so you can wire it to your setup.
Note: Connector styles and pin order can vary—verify your controller pinout before wiring.
Material: 6061‑T6 Aluminum (CNC)
Finish: Anodized Black
Handlebar fitment: 22.2mm OD
Cable length: 200mm standard (extensions available)
Weight: 152g (pair)
CNC 6061‑T6 aluminum body
Full‑twist throttle feel with smooth modulation
Blue LED “active” indicator
Lock‑on grips (includes matching left grip)
Replaceable grip sets
Weather‑sealed electronics
Fits standard 22.2mm handlebars
For standard 3‑wire throttle inputs (5V / Signal / Ground)
